Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions
THE BUYER'S GUIDE / SELECTION
A buyer-focused guide for procurement teams comparing offers from a hose crimping machine manufacturer or supplier. It explains how to check the Willex Power DZW-51BY against your hose type and size range, die coverage, machine footprint and weight, power supply and production volume, using the published product specifications from Dezhou Willex Hydraulic Machinery Co., Ltd. It also lists the questions to confirm before you order.
Hose medium and construction: published crimping range is hydraulic hose 1/4" to 2" 4SN; other hose types require confirmation
Dimensional fit: maximum open diameter 113 mm, max. opening ±30 mm, and a standard set of 10 dies covering 15–93 mm
Crimping force: 1650 kN as published
Footprint and handling: machine size 800×630×1300 mm, 285 kg net; packing 870×670×1420 mm, 320 kg gross
Operating conditions: pump output 2.5 L or 5 L optional; multi-voltage and motor options must be confirmed against site power
Production volume: published work efficiency up to 200 pcs/h; optional quick-change mold and touchscreen for frequent changeovers
If you compare quotes from more than one hose crimping machine manufacturer or supplier, the spec sheet only helps when you can line it up with your own workshop. This guide uses the published specifications of the DZW-51BY Hose Crimping Machine from Dezhou Willex Hydraulic Machinery Co., Ltd. to show which checks matter and where you still need confirmation before you buy.
This is not a price, lead-time or certification guide. The source material does not include any of these, so ask for them in writing as part of your quotation.
The DZW-51BY is described as a workshop crimper for hydraulic hose assembly. Its crimping range is listed as 1/4" to 2" 4SN. That gives you the first filter:
Tell the supplier which fittings you use (ferrule type and material) as well as the hose. The product data gives a crimping range, not a list of compatible fitting systems.
Dimensional fit means the machine can open far enough to take your fitting and close to the diameter you need. The published figures are:
| Parameter | Published value |
|---|---|
| Crimping range | 1/4–2" 4SN |
| Max. opening | ±30 mm |
| Maximum open diameter | 113 mm |
| Crimping force | 1650 kN |
The machine comes with a fixed set of 10 standard dies:
| Die no. | Range (mm) | Length (mm) |
|---|---|---|
| ∅15 | 15–19 | 60 |
| ∅19 | 19–23 | 60 |
| ∅23 | 23–26 | 60 |
| ∅26 | 26–31 | 60 |
| ∅31 | 31–36 | 70 |
| ∅36 | 36–41 | 70 |
| ∅41 | 41–47 | 70 |
| ∅47 | 47–55 | 80 |
| ∅55 | 55–63 | 80 |
| ∅63 | 63–93 | 80 |
How to use this: take the final crimp diameters from your fitting supplier's crimp chart and check that each one falls inside one of the die ranges above. Check the outside diameter of your largest fitting before crimping against the 113 mm maximum open diameter. Any size that falls outside these ranges needs an optional die, and you should confirm it with the supplier. Extra optional dies are available.
| Item | Published value |
|---|---|
| Machine size | 800 × 630 × 1300 mm |
| Packing size | 870 × 670 × 1420 mm |
| Net weight | 285 kg |
| Gross weight | 320 kg |
Use the packing size and gross weight when planning shipping, unloading and moving the crate through doorways. Use the machine size and net weight to plan the workstation, and leave extra room for loading hoses and changing dies. The source does not state floor-load or anchoring requirements. If these matter at your site, ask for them.
The product page lists several configurable items:
The page does not give specific voltage, frequency or motor power values. Before you order, send the supplier your site's voltage, phase and frequency and ask them to confirm the motor and electrical configuration on the quotation. This matters for buyers in different markets, for example the United States, Europe, the Middle East and Southeast Asia. The source also does not give an ambient temperature, humidity or duty-cycle rating, so confirm these if your workshop runs in demanding conditions.
The DZW-51BY's published work efficiency is up to 200 pcs/h, and the product page describes it as suited to high-volume, continuous daily production. Treat 200 pcs/h as the upper figure, not a guaranteed rate. Real output depends on hose size, how often you change dies and how your operators handle the hoses. If you change jobs often, ask about the optional quick-change mold and touchscreen control. The supplier says these reduce changeover time.
Whether you shortlist suppliers in China or elsewhere, ask for the same items in writing:
Look at other models if you need to crimp hoses larger than 2", if your final crimp diameters fall outside the die ranges and no suitable optional dies exist, or if you need documented electrical or environmental ratings the supplier cannot provide. If you crimp non-hydraulic hose, check the machine with real samples before you buy.
For full specifications and to request a configuration, see the DZW-51BY hose crimping machine product page.
THE COMPANY
As a professional hydraulic machinery supplier, Dezhou Willex Hydraulic Machinery Co., Ltd. Offers a wide range of practical equipment to meet the hydraulic processing needs of various scenarios: • Hose Crimping Machine • Hose Cutting Machine • Hose Skiving Machine • Nut Crimping Machine • Air Conditioning Hose Crimping Machine • Customized Large-Diameter Crimping Machine • Hydraulic hoses and fittings These machines are widely used for crimping high-pressure oil pipes, industrial hoses, fire sprinkler hoses,…
YOUR NEXT STEP
Use case, specification, quantity and delivery window: make the next conversation specific.