• Home
  • news
  • DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production: Compatibility, Sizing and Documentation FAQ

DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production: Compatibility, Sizing and Documentation FAQ

DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production: Compatibility, Sizing and Documentation FAQ

October 29, 2026
Dezhou Willex Hydraulic Machinery Co., Ltd.JOURNAL / QUESTIONS & ANSWERS

QUESTIONS & ANSWERS

DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production: Compatibility, Sizing and Documentation FAQ

This FAQ answers common buyer questions about the DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production from Dezhou Willex Hydraulic Machinery Co., Ltd. — covering crimping range and die sizing, industry compatibility, included accessories, control modes, power options and custom-die availability. Every answer draws directly from the published product documentation.

AI illustration: DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production: Compatibility, Sizing and Documentation FAQ
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production — Frequently Asked Questions

Buyers evaluating the DZW-50WS-1 Cost-Effective Hose Crimper for Mass Production from Dezhou Willex Hydraulic Machinery Co., Ltd. often ask about hose size coverage, die compatibility, included documentation and production control flexibility before committing to a workshop purchase. The questions below are drawn from the product’s own FAQ section and specification sheet, so every answer is grounded in published product data.


Crimping Range and Die Sizing

The DZW-50WS-1 covers a crimping range of 1/4” up to 2” (approximately 6 mm to 50 mm nominal). Ten standard die sets ship with the machine, spanning these nominal ranges:

Die No. Range (mm) Die Length (mm)
∅15 15 – 19 60
∅19 19 – 23 60
∅23 23 – 26 60
∅26 26 – 31 60
∅31 31 – 36 70
∅36 36 – 41 70
∅41 41 – 47 70
∅47 47 – 55 80
∅55 55 – 63 80
∅63 63 – 93 80

Smaller molds — ∅6, ∅8, ∅10 and ∅12 — are listed as optional and are not part of the standard ten-set package.


Key Machine Specifications

Parameter Value
Crimping Force 1,650 kN
Maximum Open Diameter 113 mm
Max. Opening ±30 mm
Pump Output Volume 2.5 L / 5 L
System Pressure 31.5 MPa
Net Weight 255 kg
Gross Weight 290 kg
Machine Size 1,000 × 690 × 760 mm
Packing Size 1,030 × 720 × 790 mm

Industry Applications

The DZW-50WS-1 is used in construction machinery, mining, agricultural machinery and hydraulic repair industries, with particular suitability for large-diameter, high-pressure hose fabrication.


Control Modes and Production Flexibility

The machine provides dual control via button and foot pedal, supporting both inching and automatic operation modes. This combination allows operators to handle precise single-crimp tasks and continuous high-volume runs from the same unit without reconfiguring tooling.


Included Accessories and Documentation

Each unit ships with 10 sets of standard dies, basic operating tools and a detailed operation manual to support quick startup.


Power Options

The DZW-50WS-1 offers optional motor power and voltage configurations so the machine can be adapted to different workshop power supply environments. Buyers should confirm their local voltage and phase requirements with Dezhou Willex Hydraulic Machinery Co., Ltd. before ordering.


Custom Dies for Non-Standard Sizes

Custom-sized dies for non-standard hose specifications are available. Buyers with unusual outside diameters or proprietary fitting standards should contact Dezhou Willex Hydraulic Machinery Co., Ltd. directly to discuss feasibility and lead times.


Noise Level

The machine is equipped with a high-performance quiet hydraulic pump, described in the product documentation as running at low noise levels for a more comfortable workshop environment.


Die Change and Downtime

The quick-change die system is a core design feature of the DZW-50WS-1, specifically intended to reduce downtime during batch switching and size adjustments — a direct benefit for operations that process multiple hose diameters in the same shift.

THE COMPANY

Dezhou Willex Hydraulic Machinery Co., Ltd.

As a professional hydraulic machinery supplier, Dezhou Willex Hydraulic Machinery Co., Ltd. Offers a wide range of practical equipment to meet the hydraulic processing needs of various scenarios: • Hose Crimping Machine • Hose Cutting Machine • Hose Skiving Machine • Nut Crimping Machine • Air Conditioning Hose Crimping Machine • Customized Large-Diameter Crimping Machine • Hydraulic hoses and fittings These machines are widely used for crimping high-pressure oil pipes, industrial hoses, fire sprinkler hoses,…

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

Share
Message
  • *
  • *
  • *
  • *

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.