How to Choose a Hose Crimping Machine Manufacturer for Workshop Production
Summary
A hose crimping machine manufacturer should match your hose range, tooling, floor space, production rhythm, and control method. The DZW-38WS covers 1/4" to 1 1/2" hoses, includes 8 die sets, and provides 1050 KN of crimping force in a 660*600*700 mm body. These details suit service centers and small workshops that need repeatable mechanical crimping.
A workshop needs more than a machine that closes a fitting. Hose range, die coverage, floor space, production rhythm, and control method determine whether the equipment fits the work. When you assess a hose crimping machine manufacturer, start with the assemblies your team produces most often. We supply the DZW-38WS for hose workshops and service centers that need repeatable crimping across common hydraulic hose sizes.
The DZW-38WS handles hoses from 1/4" to 1 1/2". Its standard configuration includes 8 sets of dies, covering crimping ranges from 15-19 mm through 47-55 mm. The die lengths are 60 mm, 70 mm, or 80 mm, depending on the die size.
| Die size | Die length | Crimping range |
|---|---|---|
| ∅15 | 60 mm | 15-19 mm |
| ∅19 | 60 mm | 19-23 mm |
| ∅23 | 60 mm | 23-26 mm |
| ∅26 | 60 mm | 26-31 mm |
| ∅31 | 70 mm | 31-36 mm |
| ∅36 | 70 mm | 36-41 mm |
| ∅41 | 70 mm | 41-47 mm |
| ∅47 | 80 mm | 47-55 mm |
This setup suits a workshop processing common hydraulic hose sizes with repeat jobs. Optional ∅6, ∅8, ∅10, and ∅12 molds are available when your hose assembly work includes smaller sizes. Check your fitting and hose dimensions against the die ranges before selecting the configuration.
The DZW-38WS uses an electric hydraulic system and provides a 1050 KN crimping force. We build it for regular workshop production where consistent radial compression matters across repeated assemblies. Inching and automatic control modes let the operator choose a working method for the job.
Manual crimping suits occasional small repairs. The DZW-38WS fits batch production, service centers, and businesses replacing labor-intensive manual crimping with repeatable mechanical operation. Its pump output is 2.5 L, supporting the hydraulic working system during hose assembly tasks.
The forged hydraulic structure and integrated forged steel crimping body are intended for frequent use. High-hardness dies support the repeated deformation needed to close hose fittings. Match the tooling and control mode to the hose assemblies you process most often instead of choosing a machine only by its maximum opening.
What to weigh
The machine size is **660600700 mm, giving the DZW-38WS a compact footprint for a hose workshop or service center. Measure the intended work area, access route, and operator clearance before ordering. The machine weighs 155 kg net and 185 kg gross**, so your receiving and handling plan should account for both the equipment and its packed form.
The maximum opening is 104 mm, with a maximum opening adjustment of ±20 mm. These figures help you judge the working envelope around your hose and fitting sizes. They do not replace a check against the selected die range, which determines how the machine matches the assemblies you actually produce.
A manual setup can suit on-site small repairs, where jobs are occasional. For workshop production, the DZW-38WS reduces manual effort and gives a repeatable mechanical process. Its space-saving footprint suits smaller processing workshops that need dedicated crimping equipment without a large machine body.
The choice depends on your work pattern. Pick manual crimping for occasional repair work. Pick the DZW-38WS when your team processes common hydraulic hoses repeatedly and needs standard dies, electric hydraulic operation, and a defined working envelope.
Your shortlist
Yes. The DZW-38WS has optional voltage configurations, so the electrical version can be matched to the power conditions of your workshop. Include the required voltage when you ask us to prepare the machine configuration. This check matters before shipment because it connects the machine selection to the installation site, not only to the hose and fitting dimensions.
The packed unit measures **690620790mm, so use that figure when checking doors, aisles, lifting points, and temporary storage space. The working machine measures 660600700 mm, but receiving access must accommodate the packed dimensions and 185 kg gross** weight. Send the access measurements with your request if the route into the workshop is restricted.
The optional ∅6, ∅8, ∅10, and ∅12 molds are useful when your hose assembly list includes sizes below the standard die sequence. They let you assess a configuration around smaller work instead of treating the standard 8 sets as the complete tooling choice for every workshop. Include the smaller hose and fitting dimensions when asking us to check the mold configuration.
The DZW-38WS suits service centers and workshop batch production that use common hydraulic hose sizes, need 8 standard die sets, and have room for a 660600700 mm machine. Review the DZW-38WS hose crimping machine with your hose sizes and fitting ranges, then send those dimensions with your workspace constraints for a quote.
The company
As a professional hydraulic machinery supplier, Dezhou Willex Hydraulic Machinery Co., Ltd. Offers a wide range of practical equipment to meet the hydraulic processing needs of various scenarios: • Hose Crimping Machine • Hose Cutting Machine • Hose Skiving Machine • Nut Crimping Machine • Air Conditioning Hose Crimping Machine • Customized Large-Diameter Crimping Machine • Hydraulic hoses and fittings These machines are widely used for crimping high-pressure oil pipes, industrial hoses, fire sprinkler hoses,…
About Us ↗Visit company website ↗