• Home
  • news
  • Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions

Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions

Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions

October 23, 2026
Dezhou Willex Hydraulic Machinery Co., Ltd.JOURNAL / THE BUYER'S GUIDE / SELECTION

THE BUYER'S GUIDE / SELECTION

Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions

A buyer-focused guide for procurement teams comparing offers from a hose crimping machine manufacturer or supplier. It explains how to check the Willex Power DZW-51BY against your hose type and size range, die coverage, machine footprint and weight, power supply and production volume, using the published product specifications from Dezhou Willex Hydraulic Machinery Co., Ltd. It also lists the questions to confirm before you order.

AI illustration: Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
01

Hose medium and construction: published crimping range is hydraulic hose 1/4" to 2" 4SN; other hose types require confirmation

02

Dimensional fit: maximum open diameter 113 mm, max. opening ±30 mm, and a standard set of 10 dies covering 15–93 mm

03

Crimping force: 1650 kN as published

04

Footprint and handling: machine size 800×630×1300 mm, 285 kg net; packing 870×670×1420 mm, 320 kg gross

05

Operating conditions: pump output 2.5 L or 5 L optional; multi-voltage and motor options must be confirmed against site power

06

Production volume: published work efficiency up to 200 pcs/h; optional quick-change mold and touchscreen for frequent changeovers

Hose Crimping Machine Manufacturer Guide: Choosing the DZW-51BY by Medium, Dimensions and Operating Conditions

If you compare quotes from more than one hose crimping machine manufacturer or supplier, the spec sheet only helps when you can line it up with your own workshop. This guide uses the published specifications of the DZW-51BY Hose Crimping Machine from Dezhou Willex Hydraulic Machinery Co., Ltd. to show which checks matter and where you still need confirmation before you buy.

This is not a price, lead-time or certification guide. The source material does not include any of these, so ask for them in writing as part of your quotation.

1. Start with your hose medium and construction

The DZW-51BY is described as a workshop crimper for hydraulic hose assembly. Its crimping range is listed as 1/4" to 2" 4SN. That gives you the first filter:

  • Good fit: hydraulic hose assemblies within 1/4" to 2", including spiral 4SN constructions up to 2".
  • Confirm first: other hose types or constructions, such as industrial, air-conditioning or other special hoses. The product page lists only hydraulic hose, so ask for a crimp sample or a written confirmation before you assume the machine suits these.
  • Not covered by this source: hoses larger than 2". The published crimping range ends at 2".

Tell the supplier which fittings you use (ferrule type and material) as well as the hose. The product data gives a crimping range, not a list of compatible fitting systems.

2. Match dimensions: crimping range, opening and dies

Dimensional fit means the machine can open far enough to take your fitting and close to the diameter you need. The published figures are:

Parameter Published value
Crimping range 1/4–2" 4SN
Max. opening ±30 mm
Maximum open diameter 113 mm
Crimping force 1650 kN

The machine comes with a fixed set of 10 standard dies:

Die no. Range (mm) Length (mm)
∅15 15–19 60
∅19 19–23 60
∅23 23–26 60
∅26 26–31 60
∅31 31–36 70
∅36 36–41 70
∅41 41–47 70
∅47 47–55 80
∅55 55–63 80
∅63 63–93 80

How to use this: take the final crimp diameters from your fitting supplier's crimp chart and check that each one falls inside one of the die ranges above. Check the outside diameter of your largest fitting before crimping against the 113 mm maximum open diameter. Any size that falls outside these ranges needs an optional die, and you should confirm it with the supplier. Extra optional dies are available.

3. Plan floor space, handling and installation

Item Published value
Machine size 800 × 630 × 1300 mm
Packing size 870 × 670 × 1420 mm
Net weight 285 kg
Gross weight 320 kg

Use the packing size and gross weight when planning shipping, unloading and moving the crate through doorways. Use the machine size and net weight to plan the workstation, and leave extra room for loading hoses and changing dies. The source does not state floor-load or anchoring requirements. If these matter at your site, ask for them.

4. Check operating conditions: power and pump

The product page lists several configurable items:

  • Pump output: 2.5 L or 5 L, optional.
  • Power supply: multi-voltage options, with customizable pump displacement and motor ratings.

The page does not give specific voltage, frequency or motor power values. Before you order, send the supplier your site's voltage, phase and frequency and ask them to confirm the motor and electrical configuration on the quotation. This matters for buyers in different markets, for example the United States, Europe, the Middle East and Southeast Asia. The source also does not give an ambient temperature, humidity or duty-cycle rating, so confirm these if your workshop runs in demanding conditions.

5. Size the machine for your production volume

The DZW-51BY's published work efficiency is up to 200 pcs/h, and the product page describes it as suited to high-volume, continuous daily production. Treat 200 pcs/h as the upper figure, not a guaranteed rate. Real output depends on hose size, how often you change dies and how your operators handle the hoses. If you change jobs often, ask about the optional quick-change mold and touchscreen control. The supplier says these reduce changeover time.

6. Questions to ask any hose crimping machine manufacturer

Whether you shortlist suppliers in China or elsewhere, ask for the same items in writing:

  1. Confirmation that your hose types, fittings and final crimp diameters fit the crimping range and die set.
  2. Sizes and availability of any optional dies you need.
  3. Voltage, phase, frequency and motor configuration for your site.
  4. Which options are included in the quote: pump output, quick-change mold, touchscreen.
  5. Price, delivery time, warranty, certifications and after-sales terms. None of these are in the product data used for this guide.

When the DZW-51BY does not apply

Look at other models if you need to crimp hoses larger than 2", if your final crimp diameters fall outside the die ranges and no suitable optional dies exist, or if you need documented electrical or environmental ratings the supplier cannot provide. If you crimp non-hydraulic hose, check the machine with real samples before you buy.

For full specifications and to request a configuration, see the DZW-51BY hose crimping machine product page.

THE COMPANY

Dezhou Willex Hydraulic Machinery Co., Ltd.

As a professional hydraulic machinery supplier, Dezhou Willex Hydraulic Machinery Co., Ltd. Offers a wide range of practical equipment to meet the hydraulic processing needs of various scenarios: • Hose Crimping Machine • Hose Cutting Machine • Hose Skiving Machine • Nut Crimping Machine • Air Conditioning Hose Crimping Machine • Customized Large-Diameter Crimping Machine • Hydraulic hoses and fittings These machines are widely used for crimping high-pressure oil pipes, industrial hoses, fire sprinkler hoses,…

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

Share
Message
  • *
  • *
  • *
  • *

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.